Shalitex Primer

Health & Safety

  • Lid of container should be firmly fixed, when not in use
  • ShaliTex Primer is inflammable and hence keep away from heat.
  • Use goggles and hand glove during application.
  • Clean hands with warm soap water after application.


ShaliTex Primer is available in 20 Ltr & 200 Ltr drums.


Keep in cool and dry place in air tight containers under shed away from heat.


ShaliTex Primer is a solvent based bituminous primer that seals pores in surfaces such as concrete and improves the adhesion of bituminous materials that are to be applied to the substrate. It is suitable for brush or spray application. It conforms to the requirement of IS: 3384-1986.


  • Priming bituminous, concrete or masonry surfaces prior to laying membrane promotes bonding, whether self-adhesive or otherwise.
  • Applied in canal lining joints and concrete floor joints prior to pouring of the bitumen sealing compound for bonding.


  • Seal pores on surfaces such as concrete.
  • Improves the adhesion of bituminous material that is to be applied to the substrate.

Application Methodology

  • Ensure not to apply when temperature is less than 5 0 C or during foggy period.
  • Before applying the primer make the concrete surfaces free from dust and sand particles by brooming and allow it to dry. Concrete should be cured and should be eight days old.
  • ShaliTex Primer should be thoroughly stirred before use and applied to the substrate by means of brush, roller or spray at the rate of 0.30 Ltr / SqM.
  • Allow it to dry for 24 hours.
Need help?