Suitable for joints required to withstand to exposure of petrol, benzol, oils of all kinds of including fuel oil, super heated steam, hot or cold water, ammonia, sulphur dioxide, coal gas and mild solutions of alkalis & acids & also joints with pressure similar to normal water supply pressure. Typical applications are pipe joints in household plumbing and industries etc.
Description Of Specification | Units | Value |
---|---|---|
Base | - | Shellac based |
Curing System | - | Air Drying |
Viscosity at 30 C (Roto Thinner) | Poise | 35 - 45 |
Specific gravity | - | 1.23 – 1.456 |
Bond Strength | Kg/cm2 | >23 |
Hydraulic Pressure (Leak test) | Kg/cm2 | 35 (max) |
Non volatile contents | % | 78 ± 1 |
Temperature resistance | - | -20 to 120C |
Surfaces should be clean, dry, and free of moisture, dust and grease. Prepare the surface by removing grease, oil rust with sand paper and clean the surface(s) with cotton waste.
Apply Holdtite evenly on outer surface of the pipe with soft brush or cloth. Allow the material to become tacky & then couple.
Available in 50, 100, 200, 500 gms & 1 kg