Holdtite Perfect Liquid Sealant
Product Description
Holdtite is a Liquid Sealant used in domestic plumbing as well as in industrial piping for transporting water steam and variety of chemicals. It is used for joining MS, SS, GI & all metal pipes. It is useful for pipe joining and leakage plugging. It not only provides a leak proof joint but also offers a perfect bond. The joints bonded with Holdtite can also be dismantled easily with conventional methods.
Characteristics & Advantages
- blue liquid
- Thick & Uniform Consistency
- Excellent applicabilityy
- Very good adhesion to metal substrate
Application
Suitable for joints required to withstand to exposure of petrol, benzol, oils of all kinds of including fuel oil, super heated steam, hot or cold water, ammonia, sulphur dioxide, coal gas and mild solutions of alkalis & acids & also joints with pressure similar to normal water supply pressure. Typical applications are pipe joints in household plumbing and industries etc.
Technical Data
Description Of Specification |
Units |
Value |
Base | – | Shellac based |
Curing System | – | Air Drying |
Viscosity at 30°C (Roto Thinner) | Poise | 35 – 45 |
Specific gravity | — | 1.23 – 1.456 |
Bond Strength | Kg/cm2 | >23 |
Hydraulic Pressure (Leak test) | Kg/cm2 | 35 (max) |
Non volatile contents | % | 78 ± 1 |
Temperature resistance | -20 to 120°C |
Characteristics & Advantages
Surfaces should be clean, dry, and free of moisture, dust and grease. Prepare the surface by removing grease, oil rust with sand paper and clean the surface(s) with cotton waste.
Application Method / Usage:
Apply Holdtite evenly on outer surface of the pipe with soft brush or cloth. Allow the material to become tacky & then couple.
Packaging:
Available in 50, 100, 200, 500 gms & 1 kg
Precaution:
- Replace the cap immediately after use. Avoid using fingers for application.
- Store in a cool and dry place.
- Inflammable. Keep away from naked flame and reach of children.